Electrical Wiring
How a sauna heater should be wired
 |
FLB heater is wired using "Liquid-Tite" from a double box in the wall to the heater - The capillar wire was routed out from inside of the heater when the bottom was removed - this thin wire is attached to the wall near the ceiling to sense the temperature in the sauna room. |
 |
Topclass-KV heater has been wired using "SO"-wire. In certain situations using the "SO"-wire is quicker and easier than conduit(s). However, if your heater is an FLC use of conduit is required. A custom footrest and guard-rail was built around the heater instead of the included standard heater-guard. Sauna also has 3 levels of benches to raise bather closer to the ceiling and to ease access to upper benches. Intake vent for fresh air is right under the heater and 2-gang box for supply just to the right of the heater. |